Posting a quick review and a quick suggestion. I have a 23Zero Armadillo fitted to a 2020 Landcruiser with aftermarket roof rack (Prinsu). The installation was performed with the help of a Gantry Crane. Super easy to have the roof rack on sawhorses so easy to make adjustments. I love the use of this system over anything I have used before. The puck system provides some cushioning resulting in a more compliant ride and reduced noise overall.

One suggestion for the next installer. Kindly leave the pucks tight enough to not move but ensure locking latches engage fully before tightening the pucks the remaining amount. I had to do this step while on the vehicle but was an easy fix. Slightly looses puck nut and latch will automatically engage fully.

What a great system. How did I not know about this. LOL

Easy to install, solid build and blends in well with the existing rack system.

Install was not difficult with the detailed instructions, access to the middle bolts was really the only problem which my wifes small hands solved. The system has worked flawlessly, looks great, very tight to the rack with no noise or movements and i have run it pretty hard. Super easy to take on and off. I have a rollnjack lift so the process takes about 20 min now to take on or off the tent and store elevevated in my garages. I have a lifted bronco with trailrax rack, this used to be qutie a choir, now it is super easy.

Great product. User friendly, easy install. 5 out of 5. Definitely recommend this product.

Replacement slider plates work great on my Roam Vagabond V1 roof top tent.

Great quick release tent mounts, works great on the Front Runner roof racks, makes installing and removing my RTT a breeze. Just returned from a 160 mile off-road trip and they never loosened up.

Easy to install. Gives the security I was looking for.

I have an OVS tent which is great, but the mounts are simple and a bit clunky.
The rack on my 4runner is a Greenland Offroad rack an dis pretty low profile, so my options are limited.
I use 12 inch sections of additional series 15 extruded rails as "risers". Without these, the mounts would not work since the knobs would contact my roof.
I also mount a 180 awning on the driver side, which prohibits tent opening if the tent Is centered on the truck.
The Vanultra mount are clean and elegant and strong.
With these mounts I can easily losen them and slide the ten to the passenger side at camp to be able to use the tent and mount together.
I spoke with Trevor several times pre and post purchase and he was super helpful in both helping me determine which mounts would work for me and how to best set things up.
Great folks, great product!

Work perfectly to lock your shadow mounts. Not sure anyone would try to run off with a RTT but nothing surprises me anymore. They will just have a little harder time with a set of these attached. ;)

Great product for a quick release solution for your RTT. I haven’t had to remove the RTT since I installed it, but the install was super quick, compared to having to use the saddle brackets. Glad I came across this product and company.

My application for this product is somewhat unique. I have a clamshell-style rooftop tent mounted to a small off-road trailer. Because of my driver-side awning, the tent needs to slide outward to open fully, then return to the center of the trailer for travel.

Previously, using standard mounts made this a chore that required tools every time. These quick-release mounts have turned that into a seamless task. While I don’t actually remove the tent from the trailer, the ability to quickly loosen, slide, and re-tighten the mounts by hand is a game changer. They are high-quality, easy to operate, and worked perfectly for my specific setup.

While I still need to set up my space to store the tent, this installation was simple and will allow for a simple removal of my tent.

Perfect! Install was really easy on the Bronco. Video install helped a lot so check it out. Very low profile. Clamps are built EXTREMELY well. Would definitely purchase again if needed. They even have locks for the mount.

Excellent product. Nothing like it for a low pro rack

Great quality product with excellent customer service. Highly recommend!